PDU- LASERWAY-2.0 AC-DC MODULE

Description

The PDU-Laserway unit has two versions:

• AC/DC, with an input of 90 VAC to 250 VAC;
• DC/DC, with an input of -38 VDC to -60 VDC.

The internal power module converts the input voltage to -54 V and powers the PSE module. The PSE module distributes the -54 V voltage to eight of -54 VDC / 1.15 A outputs each.

The outputs are independent of each other and are protected against overcurrent and short circuit. The module has protection against voltage surges, both at the input and at each of the outputs and the access to the outputs is made through 8 electrical terminals in pairs, with polarity identified on the front of the PSE module.

The Optical module receives a fiber cable and distributes the signal to eight optical connectors. The PDU-Laserway 2.0 will allow the use of hybrid cable and field connectorization and can be mounted on a wall, electro-rail, DIN rail, 19” rack, or airtight box.

The maximum electric power available per PDU port is 62 W.

Please check availability in your region.